Your Whirlpool dishwasher is not drying dishes.
Maybe it’s one of the newer models. One of the most common symptoms is failure to show completion of the cycle.
Or, it may simply have a broken drying cycle. Whatever the problem is, you can troubleshoot it and fix it.
So, why is my Whirlpool dishwasher not drying dishes?
Unfortunately, many Whirlpool dishwashers have problems with drying dishes.
One of the most common problems is the dishwasher not heating properly. The dishwasher may heat too slowly or not at all.
The dishwasher may heat too quickly and may cause the dishes to warp or crack. Another common problem is the water not getting hot enough.
The water may not get hot enough to wash dishes properly or may not get hot enough to dry them. Finally, the dishwasher may not drain water properly or may drain water very slowly.
In all of these cases, the solution is easy and inexpensive. The dishwasher just needs to be repaired by a professional.
- 1 Why Is My Whirlpool Dishwasher Not Drying Dishes?
- 2 What To Do When Your Whirlpool Dishwasher Leaves Dishes Wet
- 3 Final Words
Why Is My Whirlpool Dishwasher Not Drying Dishes?
Water Temperature is Too Cold
When hot water is utilized to wash the dishes, the dish washer heats the water to the right temperature. Then they wash the dishes with hot water and detergent.
This is due to the fact that hot temperatures kill bacteria and other germs that may be present on the dishware and cutlery that we eat with and use every day.
Check that your Whirlpool dishwasher is linked up to your water supply correctly and that the hot and cold valves are in the correct position.
Check the temperature of the water coming out of the tap and ensure that it is 120 degrees Fahrenheit (49 degrees Celsius) or higher at the inlet valve to the machine for maximum efficiency.
If it is less than 120°F, the dishwasher’s heating elements may not be able to sufficiently heat up the water within the unit to effectively wash and dry your dishes and cutlery, thereby resulting in poor washing performance and, ultimately, a failure to dry your dishes at the end of the cycle.
More than simply drying performance is affected by the loading of your plates, cups, glasses, and other kitchen utensils into the racks of your Whirlpool appliance.
The proper loading methods may boost dishwasher efficiency by up to 20% or more in some cases and will also improve drying results by making sure all the dirty water is removed from each dish before you put it in the machine.
Lack of Rinse Aid
Rinse assistance is an important part of any dishwashing process because it lubricates the spray arms and makes sure that no food particles are left on the dishes after they have been washed and dried in your Whirlpool appliance.
Rinse aid changes the structure of water droplets, allowing them to be more easily removed through evaporation as they travel through the spray arms of the machine, thus ensuring that all traces of dirt, grease, and food residue are removed from your dishes before they are dried.
Always add rinse aid to the machine and then check the manufacturer’s instructions to determine how much should be added-ideally, about 1 tablespoon per load, though this amount may vary depending on the type of rinse aid used and the hardness of the water.
Some dispensers can automatically change the amount of rinse aid based on how many dishes are in the machine.
If this is an option on your model, then make sure that you follow the instructions in the manual to ensure that you maintain the correct amount of rinse aid in each load that you run.
What To Do When Your Whirlpool Dishwasher Leaves Dishes Wet
Whirlpool Dishwasher Parts Defective
A faulty component, like with any of the above symptoms, can cause your Whirlpool dishwasher to not dry dishes properly.
If the dishes are wet after running a full cycle, check to make sure all the dishes have been removed from the racks and have been dried completely.
Sometimes, the dishwasher doesn’t turn off properly, and the dishes are left wet.
But, even when you put it through its paces and unload it, the dishes still appear damp.
Heated Dry Setting Not Being Used
A heating element is used in most dishwashers to help dry the dishes after a wash cycle has been completed.
It also uses a fan to blow air across the dishes and into the upper rack of the unit to dry them more thoroughly and quickly.
Check your owner’s handbook to see whether or not your dishwasher has this feature, and if it does, ensure that the heated dry setting is turned on before starting a wash cycle.
While it is picked up automatically for most cycles, this setting is not always selected by default for other cycles, so be sure to double check before running the wash or drying program you select.
Some dishwasher models also enable you to adjust the heated dry settings manually in order to accommodate different types of loads or different sized loads.
Using No Rinse Aid
A Whirlpool dishwasher that is out of rinse aid will not produce any results during a wash cycle.
This important liquid changes the surface tension of water molecules so that food particles and other residues that stick to dishes can be easily lifted off during the washing process.
Unloading Dishes in the Wrong Order
Removing things from the top rack first causes water to spill onto lower racks during the draining process and may result in the water not draining completely, leaving water in the bottom of the tub.
Unload the lowest rack first so that the water is flowing toward the drain when the top rack is removed.
Dishwasher Not Loaded Properly
Overloading not only makes dishes unclean but may also cause items to fall or shift during the dish washing process, which can damage the machine itself or cause the unit to malfunction.
When there are too many goods inside the machine, it can overflow and cause damage.
Water might gather if racks are overloaded as well, which will result in inadequate cleaning of your dishes.
Also Read: How To Empty Rinse Aid Dispenser Bosch
In conclusion, if the filters and heating elements in your dishwasher are dirty, it may not dry dishes well.
These problems can be fixed by replacing the filters and heating elements.
If your dishwasher still won’t dry dishes properly, then you should contact a professional appliance technician.